Contamination Checking Kit (CCK) - Contamination Checking Kit (CCK) Exporter, Manufacturer, Distributor & Supplier, Ahmedabad, India

Product Code : 15 Brand Name :TRident Engineering

Product Specification

Contamination Checking Kit (CCK)

This kit enables the determination of the oil cleanliness level before and after its filtration. The contamination level can be clearly seen from the colour of the oil patch created on the sub-micronic membrane produced by passing the oil through the membrane.

Oil Testing Method by Contamination Checking Kit ( CCK )

Assemble the glass / FRL Assembly over 250 ml of Filtering Flask.
First, two/ three time Clean the Benzene.
Take 33 cc of Oil sample in graduated glass tube.
Add 33 ml Benzene / Chemical in oil and stir well for dilution the oil sample properly.
Pore this diluted oil in graduated glass cylinder.
Switch on the vacuum pump and wait for few seconds till the total quantity of oil sample passed through the membrane filter.
Switch off the vacuum pump.
Pick the membrane filter by using the picker only.
Paste this membrane (Patch) on test report using transparent tape.

Thus one patch of the oil sample is obtained. Such patches are to be made corresponding to different intervals. The number of patches to be obtained will depend upon the contamination level of the oil. Generation of Four to Five Patches is recommended.

In order to determine the cleanliness of the oil, the colour of the patches is compared. The patch at the beginning of the cleaning cycle will be brownish yellow and tends to get lighter in subsequent patches. The oil is totally cleaned when you get the patch almost as same as the original membrane colour filter colour.

The comparison of the patches can be done with naked eyes. To know the maximum size of the particle/contaminant, the patch can be observed under a Microscope.

Confirmation of Moisture content
Checking the moisture content of the oil.

Bubbling Test

Take about 10 cc oil sample and heat it. The presence of water or moisture is indicated by the cracking sound of water bubbles in the sample.

Item Description	Qty.
Glass Funnel	1
Glass Porous Base	1
Metal Clamp	1
0.8 Micron Membrane Filter Paper	1Box(100Nos.)
Filtering Flask 250 ml	1
Filtering Assembly (Sr. No. 1,2&3)	1
Vacuum Pump 230 VAC	1
Moisture Tester with Spoon	1
50 ml Test Tube	1

<< Back